43MM
ENTEK introduces their NEW QC3-43MM twin-screw extruder. It will provide enhanced quick-change, quick-clean, and quality control capabilities to compounders.

QC3-43mm Twin-Screw Extruder flyer
43mm Twin-screw Extruder Spec Sheet
Diameter | 43 mm |
---|---|
Rotation | Co-Rotating |
Length | 40-52 L/D |
Screw Center Distance (mm) | 35 |
Screw Do/Di Ratio | 1.61 |
Flight Depth (mm) | 8.0 |
Free Area, 2-Flight (cm2) | 11.2 |
Shafts | 36 Tooth Involute Spline |
Form | Square, Flanged |
---|---|
Length | 180 mm |
Cooling | Internal Liquid Cooling |
Open Barrel Heat Zone | 2.8 kW Bronze |
Closed Barrel Heat Zone | 4.0 kW Bronze |
Std. Gearbox Ratios | 1.39 / 2.78 |
---|---|
Screw Speeds | 1260 / 630 rpm |
Motor @ 1750 rpm | 200 / 100 hp |
Motor Equivalent in kW | 149 / 75 kW |
Voltage Options | 380 / 415 / 460 / 575 Volt |
Standard Motor Controller | AC |
Standard Machine Configuration: 1 Feed Barrel, 8 Solid Barrels, 1 Vent Barrel, Gear Box Lube, Barrel Cooling Pump, 9 Bronze Cast Heater Zones
Controller | Ethernet PLC with Color Computer Interface |
---|---|
Heat/Cool Zones | Up to 16 Standard (additional upon request) |
Installed Cooling Capacity (gearbox and barrel) | 17 tons [60 kW] |
---|---|
Typical Cooling | 5 tons [18 kW] |
Est. Power Requirements* | 134A Power, Minimum Breaker 200 Amps |
Centerline Height | 1080 mm [42.5 in] |
Length, 48D | 5150 mm [203 in] |
Width | 1030 mm [40.5 in] |
Height (top of motor) | 1430 mm [56 in] |
Weight (approx.) | 4530 kg [10,000 lb] |
*Standard Machine Configuration - 1 Feed Barrel, 8 Solid Barrels, 1 Vent Barrel, Gear Box Lube, Barrel Cooling Pump, 9 Bronze Cast Heater Zones